Dr. Prabir Chaudhury is the President of Education and Consulting LLC. He is a Metallurgical Engineer with a Ph.D. in Engineering from the University of California, Irvine, CA. His expertise is in the areas of physical and mechanical metallurgy with extensive background in metal additive manufacturing, high temperature deformation, including thermomechanical processing of metals, alloys, and metal matrix composite materials. He has more than 30 years of experience in materials, process, and product development with a strong emphasis in research and development. He has developed new metal Additive Manufacturing alloys, innovative metal processing methods, and novel products for Aerospace,Defense, Automotive, and other industriesusing his deep knowledge in materials science and engineering. Currently, Dr. Chaudhury is engaged in advancing materials and processing technologies for Metal Additive Manufacturing applications in Defense, Aerospace, Automotive, consumer goods, and other industries. As the Technical Fellow at Divergent 3D Technologies Corporation, He developed and patented new AM materials and processing technologies for the automotive industry. He worked internationally with AM raw material producers to improve raw material quality and production yieldwith a three-fold decrease in raw material price and five-fold increase in AM productivity. He also worked closely with Non-Destructive Inspection (NDI) machine developers and implemented a production line capable NDI system for factory environment. Prior to Divergent 3D, Dr. Chaudhury was the Global Technical Director at Exova (now Element Materials Technology) providing technical leadership for its 70 metals laboratories in 33 countries. He led the Additive Manufacturing testing and consulting business by defining technical standards for testing, inspection and qualifications. He also promoted AM and implemented best practices for advancement of metal AM in Aerospace, Defense, Medical, and other industrial sectors across the globe. In this role, He defined R&D and technical strategies, drove development and industry acceptance of technical standards and methods, and functioned as a critical bridge between technical and business leaders.Dr. Chaudhury has been working closely with the global Additive Manufacturing industry through his participation in ASTM F042 and SAE AM committees, NIST, America Makes, FAA, and ISO collaboration efforts and working with OEMs, AM manufacturers, machine builders. Dr. Chaudhury has a strong background in materials and process engineering of light metals, including Ti, Al, Mg, and other metals and their alloys. He has extensive teaching experience at universities, and at professional level in the industry, under US Defense programs, and through ASM International

Nathan Michaud is Vice President and co-owner of REM Surface Engineering, a leading global provider of Isotropic Superfinishing of metal components for nearly sixty years. In recent years, Mr. Michaud has overseen the company’s strategic research partnerships focused on developing post-processing technologies for additively manufactured metal components, resulting in applications developed and implemented for NASA’s Artemis Missions, the US Air Force and Air Force Research Lab, and commercial applications for industries including space launch, aerospace, and many others. REM’s novel optimized post-process surface finishing technology facilitates additive manufacturing of metals by remediating nearly all potentially detrimental surface and subsurface defects on as-printed components (including complex internal structures and channels), increasing performance as well as imparting greatly enhanced mechanical strength, heat and corrosion resistance. Furthermore, the process allows for part lightweighting and the generation of ultra-thin walls and lattices via controlled material removal.

Dr. Hai Xiao joined Clemson University in 2013 as the Samuel Lewis Bell Distinguished Professor of Electrical and Computer Engineering, jointly affiliated with COMSET. Previously, he was a Professor of Electrical Engineering at the Missouri University of Science and Technology (Missouri S&T) where he served as the founding director of the Photonics Technology Laboratory (PTL). Dr. Xiao received his Ph.D. degree in electrical engineering from Virginia Tech in 2000. From 2000 to 2003, he was a Member of Technical Staff at the Optoelectronic Center of Lucent Technologies/Agere SystemsDr. Xiao is the recipient of a number of prestigious awards including the Office of Naval Research Young Investigator Program (YIP) Award in 2006, the R&D 100 Award in 2004, and the Virginia Tech Outstanding Achievement Award in 2003. Dr. Xiao’s research interests mainly focus on photonic and microwave sensors and instrumentation for applications in energy, intelligent infrastructure, clean-environment, biomedical sensing/imaging, and national security. Current research thrust areas include: 1) Novel optical/microwave micro/nano materials, structures, devices and sensors, 2) Fiber optic and microwave sensors and instrumentation for applications in harsh environments, 3) Ultrafast laser machining, processing/modification and characterization of materials and structures, and 4) Optical biomedical imaging, sensing, tomography/microscopy and spectroscopy. Dr. Xiao has co-authored over 160 technical papers and participated in 29 research projects, totaling about $14M in research funding in the past 10 years from various sources including NSF, DOE, ONR, NIH, ARO, national laboratories and private companies.

Humna Khan has worked in the Aerospace & Defense industry for two decades, serving in the space sector for payload development, vehicle engineering and launch activities, with a focus on failure analysis. Her previous role was in the U.S. Civilian Air Force Services leading the qualification of flight-critical hardware for rockets delivering NRO missions, guiding the DoD and DCMA. Prior to this, Humna was the Program Manager for the NASA Process Control Program for the Office of Safety and Mission Assurance. She also served as the youngest Associate Professor at the School of Engineering at Cal State LA. Humna holds five degrees in Engineering and Business disciplines. She holds post-grad in Strategic Business Development and is a Six Sigma Black Belt for Lean Production. On her free time, she is on the NASA CubeQuest Team, developing a minisat capable of achieving lunar orbit that will break away for deep space operation. Currently Humna is the CEO+Founder of ASTRO Mechanical Testing Laboratory - working closely with industry leaders to determine characteristic of 3D printed metal alloys and composites. She is also the COO of MIMO Technik - an AM company that builds production flight hardware for OEMs and new space companies.

Wilderich is a Partner & Associate Director at the Boston Consulting Group. He is a core member of BCG's Innovation Center for Operations and is very active in BCG's Healthcare, Consumer Products and Industrial Goods practices. His focus at BCG is on advanced manufacturing topics such as additive manufacturing/3D printing, digitalization, and the Factory of the Future/Industry 4.0 as well as on manufacturing strategy and network optimization. He joined BCG in 2006 after graduating from Darmstadt University of Technology with a master's degree in industrial/mechanical engineering. He holds a Ph.D. in engineering from the Technical University of Berlin

Jan Van Humbeeck obtained his master degree of Materials Engineering in 1976 and his PhD in 1983 at KU Leuven (Belgium). Since 2017 he is prof. emeritus with assignment at KU Leuven. His main research topic was related to the development of optimization of structural an functional properties of Shape Memory Alloys (Cu- ,Fe-,NiTi-based). Since about 15 years he devotes a large part of his time also to microstructural analysis and optimization of the properties of parts produced by Additive Manufacturing. The focus is on SLM (Selective Laser Melting) of specific Titanium-, Aluminum-, Steel and NiTi-alloys. Jan Van Humbeeck published about 450 papers in peer reviewed journals, about 200 papers in conference proceedings and 14 chapters in books and gave more than 100 invited and keynote lectures and seminars.His h-index is 70. He was visiting professor at research institutes and universities in Argentina, France, India, Japan, Spain and Switzerland.

With a technical background and a strong passion for innovation, Charléne was captivated by the large-scale additive manufacturing technology at CEAD. During her bachelor and master's degree in Marine Technology at the Delft University of Technology, she did multiple research projects in ship production, where she strongly experienced the need for more sustainable manufacturing methods. During her studies she experienced the importance of innovation to accelerate business development, but that change management often forms a bottleneck within large manufacturing companies. For this reason, she dedicated her thesis to moving towards a digital shipyard by integrated information technology systems taking into account the resistance forces from employees to this paperless change. Starting as the 5th employee of CEAD as business developer, she focused on the development of her marketing and sales skills. This brought her to the position of chief commercial officer, where she is now able to determine the commercial strategy of the company. At CEAD, she faces the same challenges during the implementation of large-scale additive manufacturing solutions she encountered in her early career. However, with her experience and enthusiasm, she is well-equipped to lead her team to tackle the challenges on a global scale.

Professor Esther Akinlabi is aProfessor of Mechanical Engineering, she iscurrently serving as the Deputy Faculty Pro Vice Chancellor for Research and Knowledge Exchange, Faculty of Engineering and Environment, Northumbria University, Newcastle, UK. In her most recent role, she served as the Director of the Pan African University for Life and Earth Sciences Institute (PAULESI), Ibadan, Nigeria.Prior to joining PAULESI, she had a decade of meritorious service at the Department of Mechanical Engineering Science, University of Johannesburg (UJ), South Africa. At UJ, she served as the Head of Department of the Department of Mechanical Engineering Science and as the Vice Dean for Teaching and Learning of the Faculty of Engineering and the Built Environment.Her research interests is in modern and advance manufacturing processes which include Friction Stir Welding and Additive Manufacturing. She has filed two patents, edited four books, co-authored seven books, and authored/co-authored over 600 peer reviewed publications.

I am passionate entrepreneur, technology executive, leader and strategist. I am expert in additive manufacturing, medical 3D Printing, AM technology implementations and applications. I have a mechanical engineering background and completed a bioengineering MSc program. I am co-founder of BTech Innovation, Trabtech, Earfit and AddPark companies who are working in the field of Additive manufacturing in various vertical industries. I have ability to manage multi-disciplinary projects and to navigate complex challenges. Our companies developed/developing many innovative AM products and services. With our highly skilled engineering team, we are passionate to change industries with disruptive technologies. Specialties: Entrepreneurship, 3D Printing, Industrial Additive Manufacturing, Medical 3D Printing, Marketing and Sales, Electron Beam Melting, Metal Laser Sintering, Topology Optimization, Desing for Additive Manufacturing, Management.

Cristian Ravariu studied Micro-electronics at the Polytechnic University of Bucharest, Romania (UPB-Ro) and graduated as MS in 1993. He then joined the research group of Devices Simulation at the Institute of Microtechnology, Romania (IMT-Bucharest). He received his PhD degree in 2001 at UPB-Ro. After two years postdoctoral fellowship 2010-2012 at UPB-Ro, and foreign stage by Prof. Daniela Dragomirescu at LAAS-CNRS, Toulouse, France he obtained the position of Full Professor at the Polytechnic University of Bucharest, Romania. He has published more than 200 research articles in SCI(E) journals and Proceedings of Conferences

As graduated Mechanical Engineer, Stefan Garbereder (56) has always been involved in special technology. Over the past years, his roles included: maintenance officer in the army (12 years) , Head of Explosive Ordnance Clearance unit in the Federal State of Schleswig-Holstein (7 years) and from 2007 in the Defense & Security Industry in UAE and as technical advisor for Abu Dhabi Police (5 years). In 2019 Stefan started as Project Manager at Al Seer Marine Abu Dhabi, a stock market listed international operating leading Yacht & Marine Company with more than 1200 highly specialized professionals from 50 countries. As Head of Innovation & Capability Development Stefan is now leading future oriented projects such as the implementation of the world’s largest robot-based AM Flexbot system, which contains 2 industrial-robots and a track system of more than 36m. The system will be used for manufacturing products such as molds and functional parts for boats and vessels but is open for other industries as well. In cooperation with CEAD from Netherlands Al Seer Marine in Abu Dhabi becomes a large-scaled 3D-printing hub for UAE and Middle East. A new era of additive manufacturing industry starts. The vision of Al Seer Marine is to print complete boat-hulls out of recycled plastics and/or biodegradable materials.

Dr. Ching Y. Suen is the Founder and Co-Director of CENPARMI and the Concordia Honorary Chair on AI & Pattern Recognition. He received his Ph.D. degree from UBC Vancouver) and his Master's degree from the University of Hong Kong. He has served as the Chairman of the Department of Computer Science and as the Associate Dean (Research) of the Faculty of Engineering and Computer Science of Concordia University. Prof. Suen has served at numerous national and international professional societies as President, Vice-President, Governor, and Director. He has given 45 invited/keynote and 300 regular papers at conferences and 200 invited talks at various industries and academic institutions around the world. He has been the Principal Investigator or Consultant of 30 industrial projects. His research projects have been funded by the ENCS Faculty and the Distinguished Chair Programs at Concordia University, FCAR (Quebec), NSERC (Canada), the National Networks of Centres of Excellence (Canada), the Canadian Foundation for Innovation, and the industrial sectors in various countries, including Canada, France, Japan, Italy, and the United States. Dr. Suen has published 5 conference proceedings, 16 books and more than 550 papers, and many of them have been widely cited while the ideas in others have been applied in practical environments involving handwriting recognition, thinning methodologies, font analysis and multiple classifiers. Dr. Suen is the recipient of numerous awards, including IAPR 2020 King-Sun Fu Prize (highest honour in the field of Pattern Recognition), Elsevier Pattern Recognition Journal Award of Excellence (2016)

Dr. Goh joined the Department of Mechanical Engineering at the University of Texas at Tyler in Fall 2015. Prior to joining UT Tyler, he worked as a senior research associate in the Systems Realization Laboratory at the University of Oklahoma from 2012 to 2015. He worked for the Korean government after he received his Ph.D. degree at Georgia Institute of Technology in 2002. Dr. Goh has diverse professional experiences, gained throughout 10+ years of industry and academic endeavors. He has published over 30 research papers in international journals and conference proceedings and is the first author of a majority of his refereed published journal papers.

Daniel Alter’s experience and repertoire is comprised of more than 25 years in the dental profession; with more than ten years of owning and operating a successful mid-sized dental laboratory, coupled with a Master’s degree in Business Management and Organizational Leadership, and a respected stellar educating record as a Professor of Restorative Dentistry at the City University of New York. Daniel is a recognized published Author, Presenter and Consultant on various relevant subjects, and is continually active in learning and sharing his knowledge with like-minded professionals. Daniel continuouslyserves the profession as the Executive Editor of Inside Dental Technology (IDT). Daniel holds the designation of a Master Dental Technologist (MDT), as well as a Certified Dental Technician (CDT) in two disciplines. His expertise involves Tooth Morphology and Gnathology, CAD/CAM, Implants, and Ceramics; while continued research is emphasized on CAD/CAM, Implantology and all its modalities, including innovative advancements for the Dental Laboratory Technology profession. Daniel provides comprehensive knowledge and expertise for any business and organization. He has been providing valuable consultation services for businesses large and small, ranging from start-ups to global multi-national enterprises. Daniel is considered to be a true problem solver, with critical thinking skills and a keen eye to the industry’s emerging trends and needs. Daniel's constant pursuit and commitment to education keeps him at the forefront of Dental Technology innovations and advances.

Beth is fully immersed into the global dental industry. She thrives researching new technologies and materials for development, management and implementation for dental markets. Her core focus is on software, digital materials, CAD/CAM equipment and development of global best practices for strategies to launch, educate and market new products and services. Beth has completed several targeted product launches and recommendations to global teams in multiple areas of industry expertise including the additive manufacturing and zirconia space. Navigating and supporting digital transformations, is her strongest asset by creating solutions for clients seeking to upgrade their business practices profitably by incorporating operational cost reductions and value realization. Beth is an avid supporter, volunteer, advisor, published author and mentor in the dental industry and active board member of the Foundation for Dental Laboratory Technology. She spends her spare time enjoying horses and activities on her farm in NJ.

Prof. Milos Janecek studied physics at the Charles University, Prague, Czech Republic and defended his PhD in 1992 at the same University. After a two-year post-doc fellowship at the University of Manitoba in Winnipeg, Canada and 1.5-year fellowship at the LTPCM INP Grenoble, France he obtained the position of the Associate Professor at the Charles University. In the years of 2003-2005 he worked as a visiting professor at the Clausthal Faculty of Technology, Clausthal, Germany. In 2017 he became a full professor at the Charles University. His research interests include: transmission and scanning electron microscopy and electron diffraction; microstructure and mechanical properties of light metals and alloys (Al, Mg, Ti); physical properties of ultrafine-grained materials processed by severe plastic deformation and spark plasma sintering; phase transformations in metastable beta-Ti alloys; structure and properties of advanced materials for biomedical applications. He has published more than 220 researched articles in WOS journals which were cited more than 3000 times, his h-index is 33 (WOS) and 41 (Google Scholar)

Stepan Lucyszyn PhD, DSc, FIEEE, is Professor of Millimeter-wave Systems at Imperial College London. For a brief time, Lucyszyn worked in industry, as a satellite systems engineer for maritime and military communications. In 1994, he registered with the Engineering Council as a qualified chartered engineer. Lucyszyn spent 12 years researching microwave and (sub-) millimeter-wave RFICs/MMICs. He co-edited a book entitled RFIC and MMIC Design and Technology, published by the Institution of Electrical Engineers (IEE, now the IET) in 2001. This book was translated into Chinese in 2007. For his contributions to RFICs/MMICs, he was made an adjunct professor at the University of Electronic Science and Technology of China (Chengdu, China) in 2008. In 2001, Lucyszyn started working on RF MEMS. In 2004, he published a review paper on RF MEMS technology, which won an IEE Premium Award in 2005. He edited the book entitled Advanced RF MEMS, published by Cambridge University Press in 2010. For his contributions to RF MEMS, he was made a guest professor at Tsinghua University (Beijing, China) in 2008. In recent years, Lucyszyn has concentrated his research activities on 3D printing for microwave, millimetre-wave and terahertz applications. For his contributions to passive component technologies, he was made a visiting professor at Tohoku University (Sendai, Japan) in 2019. In 2022, for their work on 3D printing, Lucyszyn and his team at Imperial College London won Junkosha's inaugural Technology Innovator of the Year Award for the Microwave and Millimeter Wave category. Lucyszyn has (co-)authored well over 200 papers and 12 book chapters in applied physics and engineering. He served as Editor-in-Chief for the International Journal of Electronics (2002-2006) and Associate Editor for the Journal of Microelectromechanical Systems (2005-2009). In 2011, Lucyszyn chaired the 41st European Microwave Conference (EuMC).

Dr. Rhys Jones AC is a Companion of the Order of Australia: “For eminent service to mechanical and aerospace engineering, and to education as an academic, researcher and author, particularly in the area of aircraft structural mechanics, corrosion repair and airworthiness”. The Order of Australia replaced a “Knighthood” in the Australian Honours systems. It is the highest honour that can be given to an Australian Citizen. He obtained his Phd in 1974. Until 1993 he was employed at as the Research Leader (Aircraft Structures) in the Australian Defence Science and Technology Organisation (DSTO). Joined Monash asthe “Chair Dr. of Mechanical Engineering” in 1993.He retired from Monash at the end of December 2017. In addition to his position at ASCENT he is currently an Emeritus Professor at Monash University and an Adjunct Professor at Swinburne University of Technology. He is currently works closely with both US Army, Navair and Boeing Defence and Space AM as well as with Zencrack® who have implemented his method for the durability assessment of conventional and AM parts as well as the DADT assessment of bonded joints into Abaqus, Ansys and Nastran.

Will be updated soon.

Prof. Adrian Olaru finished the University Politehnica of Bucharest, Faculty of Machines and Manufacturing Systems, Romania, in 1974, head of promotion. From 1974 until 1990 he worked as a designing engineer at the "Optica Romana" Enterprise, also being an associate assistant at the Faculty of Machine-Building Technology of the Polytechnic Institute of Bucharest. In 1990 Prof. Adrian became an appointed lecturer at the Faculty of Technological Systems Engineering and Management, the Machine-Tools Department. Now, he is university full professor, and teaches the following courses: Industrial Robots Dynamics, LabVIEW application in modeling and simulation of the dynamic behavior of robots, Technological Transport Systems, Electrohydraulic Servosystems, Analyze and Syntese of Electrohydraulic Servosistems for Industrial Robots, Personal and social robots and Vibration of the virtual prototypes of industrial robots. Prof. Adrian Olaru has published over 160 national and international papers concerning modeling and simulation of hydraulic power system, technological transport systems, electrical and hydraulic servo systems and dynamic behavior of industrial robots. For recent relevant details, see the publication list and the web page. He also has substantial contribution for over than ten technical books. Prof. Adrian Olaru was invited professor of the prestigious universities arround the world and the invited speacker at the different international conferences from Slovakie, France, Italy, China, India, Iran, Poland, Autrich, Rusian Federation, United Arab Emirates, Turkie, Croatie. He was coopted each year in the more than 30 International Technical Committees and like general co-chair from the different international conferences arroun the world: USA, Australy, India, United Arab Emirates, Porto Rico, China, Singapore, Malayesia, Japan, Tayland, Slovaky, Czech Republic.

Mr. Poul Søgaard Been working with Metal Injection Molding since 2007 during my study at the university, since June 2008 I have been employed at Sintex a/s with the main task working in MIM. In january 2012 I finished a course on project management, and have since been working as project manager and technical responsible on the MIM department. I am involved in all aspects of the MIM manufacturing, from buying equipment, designing parts in relations to the customer, and finishing products to the customers wish. In 2013 i completed six sigma green belt training, and 2014 i started on the six sigma black belt training, which was finished with a Black belt certification summer 2016

Şenay Mihçin received her Ph.D. degree in Computational Biomechanics from Loughborough University, UK, funded by Engineering and Physical Sciences of Research Council, UK(EPSRC). She worked as a research assistant at Computer Science on crash simulations using model ‘Expecting’ for producing guidelines for automobile designers and manufacturers. She also worked as research fellow at mechanical engineering department of University of Leeds on ‘Kinematic FE Modelling of Cervical Spine’. She worked in industry in Manchester, UK, at Simulation Solutions Ltd, a producer of simulators for artificial implants. She worked as a team leader at Medical School of Dundee University on translation of research into the clinics for EU funded FP7 project called ‘Trans-fusimo’. Dr Mihcin joined in University College of London, UCL for more translation of research activities, working on quality management of the translational projects for novel medical devices and methods as a part of Wellcome / EPSRC Centre for Interventional and Surgical Sciences (WEISS) center. Dr Mihcin got awarded under TUBITAK 2232 International Outstanding Research Fellows funding scheme with a total budget of 3680000TL, and she started her own research lab at Izmir Institute of Technology, she is currently a faculty member as an Assistant Professor, at IZTECH, Mechanical Engineering department. She is currently the PI of “3D Printing Technology of Integrated Material & Structure for Medical Application” supported by National Key R&D Program of China [Grant Number: 2018YFE0207900], one of the 9 international institutions including UK, Germany, Portugal, Vietnam, Russia, Turkey and China. Her current research interests include biomechanics, human motion modelling and simulation, gait activities, motion capture systems, daily life activities, design of implant testing simulators, design of implants, testing of implants, ISO 13485, ISO 14242 standards, medical device testing, qualification, CE marking, medical technology management.

Prajwal Agrawal is currently a Research Associate at ETH Zurich, Switzerland working with Dr. Daniel Ahmed on Acoustics robots and their manipulation in humans and also developing cuttingedge fabrication technologies for acoustics robotics, (bio)fabrication, and precision medicine. Previously he worked as a research assistant in Dr. Shrike Zhang’s group at Harvard Medical School and Brigham's and women's hospital, USA working towards fabricating and developing novel techniques for tissue engineering. In May 2022, he completed his post diplomat position at ETH Zurich. Having completed his undergraduate studies at Harvard University in the USA and VIT Vellore in India, he has a B.Tech. degree in Mechanical (Major) and Civil (Minor). Since May 2017, he has worked at the Manufacturing Department, VIT campus. Here, his research focused on the fabrication and analysis of metals, natural fibers, composites, and other materials. For this, he has been awarded G.D. Naidu Young Scientist Award, Achievers award, and C.V. Raman Award by VIT for his outstanding academic and co-curricular performance. Moreover, he has been awarded third place for the best poster award at MaP 2022. Besides academics, he has collaborated with companies such as Bosch, Mahindra Rise, Natural's Sugar LTD, and others. Among his publications are 10+ papers in high-impact peer-reviewed journals, such as Small Structures, Applied Physics Reviews, Materials Today, Nature Communications, Advanced NanoBiomed Research, and others. He has also written two book chapters, one for Wiley and one for Elsevier. In addition, he has written 2 editorials and 4+ conference papers. Furthermore, he serves as a reviewer for several journals published by Springer Nature and Elsevier. His current research interests are focused on exploring new possibilities for using additive manufacturing techniques for the benefit of society.

Javaid is an Associate Professor of Digital Manufacturing at Anglia Ruskin University. He has a wealth of experience in characterizing and analyzing varied materials for product development. He has designed and developed several processes capable of manufacturing polymers, metals, and composites based on the techniques of additive manufacturing. Javaid’s current research focuses on interlacing existing manufacturing practices (subtractive, additive, and hybrid) with advanced robotics and development of functional digital twins of additive manufacturing systems for engineering applications. His research interests include Additive/hybrid manufacturing, Digital twins, Industry 4.0 and Metal/polymer/composite/hybrid materials.

Dr. Camila Uzcategui is the Cofounder and CEO of Vitro3D, a venture-backed spin-out of the University of Colorado Boulder bringing its patented volumetric 3D printing solutions to a number of industries, including life sciences, dental, hearing, aerospace, and automotive. With its groundbreaking achievements, Vitro3D is poised to lead the way in volumetric 3D printing and transform the industry. Her PhD and postdoctoral research focused on building light based 3D printers while innovating on 3D printing materials for tissue engineering and regeneration. Prior to CU Boulder, Camila received a B.S. in physics at Florida International University. Camila believes that deep technology entrepreneurship with a social lens can solve interdisciplinary problems with the help of 3D printing.

My name is Hagar El Bamby. I am a PhD candidate at the steel department at Delft University of Technology working on the fatigue behaviour of additive manufactured steel. I obtained my bachelors in civil engineering and my master's degree in structural engineering from TU Delft. My master's research focused on experimental and numerical investigations on the structural performance of mild and high strength steel welded rectangular hollow section (RHS) X-joints. I worked for 2 years as a researcher and teaching assistant at my department. I did research on the fatigue behaviour on welded connections in orthotropic steel deck and on the fatigue performance of bolted connections (Ring flange) in wind turbines.

Dr. Hao Yi is currently an Assistant Professor (doctoral supervisor) in the College of Mechanical Engineering at Chongqing University, China. He received the B.S. degree in mechanical engineering from Northwest Agriculture & Forestry University, China, in 2012, and the Ph.D. degree from Northwestern Polytechnical University, China, in 2019. He is serving as Associate Editor for Journal of Mechanical Engineering Science (Proc. IMech E Part C), Experimental Techniques, Micro & Nano Letters, and Editorial Board Member for Frontiers in Materials, Advances in Materials Science and Engineering, Materials Science-Medziagotyra, etc. His main research interests focus on 3D Printing and Additive Manufacturing, Green Manufacturing, Production Research, etc.

Büşra Ünlü received her M.Sc. in Metallurgical and Materials Engineering at the Middle East Technical University. She is a PhD candidate at the Department of Metallurgical and Materials Engineering, Middle East Technical University and a Technology Development Lead Engineer in the Research and Technology Centers, Engineering Vice Presidency, Turkish Aerospace. Her research interests include issues related to surface coatings, electrochemistry, composites, thermoplastics and additive manufacturing. She works as critical technical personal in Horizon Europe projects. She has publishedresearch papers at international journals and conference proceedings as well as international patents.

Halil İbrahim received him M.Sc. in Mechanical Engineering at the Gazi University. He is a PhD candidate at the Department of Mechanical Engineering, Gazi University and a Technology Development Senior Lead Engineer in the Research and Technology Centers, Engineering Vice Presidency, Turkish Aerospace. His research interests include issues related to advanced manufacturing technologies, additive manufacturing, support structure. He also teaches additive manufacturing course at Turkish Aerospace Company. He has published research papers at international journals and conference proceedings as well as patents.

Dr. Aamer Nazir is a Research Assistant Professor in the Department of Industrial and Systems Engineering (ISE) at The Hong Kong Polytechnic University (PolyU). He received his master’s degree in Manufacturing Engineering from the University of Engineering and Technology, Lahore in 2016 and Ph.D. in 2019 in Mechanical Engineering from the National Taiwan University of Science and Technology (NTUST). During his Ph.D., he was awarded CTCI Foundation Taiwan Science and Technology Scholarship Award for Excellence in Research. After Ph.D., he started working as a postdoctoral fellow and was then promoted to a Contract Assistant Professor in 2020. In this position, he was actively involved in several local/international research projects and secured several research grants as PI/Co-PI. His research areas include additive manufacturing (AM), cellular/lattice structures design and optimization, design for AM, multi-material 3D printing, and bio-inspired design. He has published over 20 SCI research articles, and 3 US/Taiwan Patents (under review), and has participated in several international conferences as Keynote or Invited speaker. He has around 4 years of full-time teaching experience and a year of working experience in the Manufacturing industry.

I am a mechanical engineer who has cultivated experience in additive manufacturing since I was first introduced to 3D printing as a member of a FIRST Robotics team in 2014. Since then, I’ve worked with various organizations to expand the capabilities of additive manufacturing from developing hardware and printing parameters for various paste viscosities to scaling novel additive methods for ceramics. I enjoy using AM in innovative ways to solve problems and using innovative methods to introduce new capabilities to additive processes

Wojciech Łapa graduated with a master’s degree in automatics and robotics with specialisation in production systems at Wrocław University of Science and Technology. Presently is employed in two research projects related to Powder Bed Fusion and Aerosol Jet Printing at Wrocław University of Science and Technology. His scientific interests are in additive manufacturing technologies and electronics printing. During the doctoral process, the topic of his dissertation is related to Aerosol Jet Printing. He focuses on the mechanical properties of the deposed conductive traces and the physical behaviour of the inks.

Dr Nitin Goyal is working as an Assistant Professor in Central University of Haryana, Mahenderagarh. He is a PhD in Computer Engineering from NIT Kurukshetra, India. He is specialized in underwater wireless sensor networks (UWSN), having applications of military operations. He obtained his B.Tech in 2007 and M.Tech in 2009 from Computer Science and Engineering under Kurukshetra University, India. He worked on wireless sensor network (WSN), mobile ad-hoc network (MANET) etc. He is having around 14 years of teaching experience along with Academic work. He has published approximately 110 research papers in various International/National Journals, Books and Conferences out of which 60 are SCI, 3 are SCOPUS, 11 are book chapters, and 30 are conference papers. He has filed more than 25 patents, out of which 7 are published and 5 are granted. Also, he has attended 13 workshops and 3 FDP. He is the Editor of 2 books from different publishers as IGI Global, CRC Press. He has guided 10 M.Tech candidates, 2 PhD candidates and 4 PhD candidates are in process. He has also delivered 7 expert lectures on NS2, Paper Writing, Patents Filing, Innovation and Entrepreneurship. He is GATE, HTET and UGC-NET qualifier too. He is currently working in the area of UAV in underwater communication networks to solve some real-world problems. His research interests include MANET, FANET, UWSN and WSN. He is a Senior Member of IEEE. He is an Editorial Board Member in the different Journals and Conferences. He is the Guest Editor of “International Journal of Distributed Sensor Networks”, SCI Journal, SAGE, "Energies", SCI Journal, MDPI, "Frontiers in Blockchain", Frontier Scientific Publishing, ESCI, "Journal of Autonomous Intelligence", Frontier Scientific Publishing, SCOPUS Journal etc.

Will be update soon.

Dariusz Jacek Jakóbczak was born in Koszalin, Poland, on December 30, 1965. He graduated in mathematics (numerical methods and programming) from the University of Gdansk, Poland in 1990. He received the Ph.D. degree in 2007 in computer science from the Polish – Japanese Institute of Information Technology, Warsaw, Poland. From 1991 to 1994 he was a civilian programmer in the High Military School in Koszalin. He was a teacher of mathematics and computer science in the Private Economic School in Koszalin from 1995 to 1999. Since March 1998 he has worked in the Department of Electronics and Computer Science, Koszalin University of Technology, Poland and since October 2007 he has been an Assistant Professor in the Chair of Computer Science and Management in this department. His research interests connect mathematics with computer science and include computer vision, artificial intelligence, shape representation, curve interpolation, contour reconstruction and geometric modeling, numerical methods, probabilistic methods, game theory, operational research and discrete mathematics.

Dr. Marcin Winnicki is a young-scientist and leading researcher in the field of surface engineering at Wrocław University of Science and Technology. He has been published extensively as author and co-author of over 40 papers in highly regarded, peer-reviewed journals. Presently, his scientific interest focuses on flexible printed electronics. Being engaged in many scientific projects he supervises with special care the construction of an aerosol jet printer of his own idea.

Ms. Melisa Altintas studied mechanical engineering at Gazi University in Turkey while working as a Lead Mechanical Engineer at Aselsan from 2025. She has expertise in mechanical design, naval and air acoustic systems, DFM, DFA, BOM, DFAM, GD&T, design outsourcing, and providing training. She was also developing a new special interface for noninvasive ventilatory support: design, produce, and apply and also received the Uneko-27 Best Paper/Presentation Award from the Turkish Neonatology Association in 2019.